The dust mop on the VRS 55 Enduro helps capture fine particles and moisture during mopping. Keeping it clean ensures effective operation and avoids odours or streaks on floors. Follow the steps below for safe maintenance.
VRS 55 Enduro Remove and Install Dust Mop Video
1. Remove the Mop Panel
-
Press the mop pad rod to release the mop mechanism.
-
Gently pull out the mop panel along the guide rail.
2. Remove and Clean the Mop Pad
-
Detach the dirty mop pad from the mop panel.
-
Rinse it under running water to remove dust and residue.
-
If needed, lightly scrub by hand using just water.
3. Reattach the Mop Pad
-
After washing, gently squeeze out excess water.
-
Let it air dry slightly, or reattach it while still slightly damp.
-
Secure the mop pad firmly to the mop panel, ensuring all sides are attached evenly.
4. Reinsert the Mop Panel
-
Slide the mop panel back into the mounting rail underneath the robot.
-
Push until you hear a click, confirming it is securely installed.
Notes
-
Clean the mop pad after every use to maintain hygiene.
-
For complete cleaning instructions, including the tray and brushes, see the Sweeper Debris Tray, Brush and Mop Cleaning Guide.
-
Always check the mop attachment before starting a mopping cycle.
If the mop panel cannot be removed or does not click back into place, please contact the Floorbotics support team for assistance.