If your VRS 55 Enduro starts acting unexpectedly, such as not responding to commands or moving erratically, it may be due to a temporary system fault. In most cases, restarting the robot will resolve the issue.
1. Power Off and Restart
-
Locate the main power switch on the robot.
-
Turn it off and wait 10 seconds.
-
Turn the power back on and observe the robot’s status.
2. Recheck After Restart
-
After restarting, place the robot on the dock or press the start button to resume cleaning.
-
Monitor whether the robot now responds normally.
If the issue continues after restarting, or if the robot displays an error code, please contact the Floorbotics support team for further assistance.