If your VRS 55 Enduro seems to miss dust or performs poorly during cleaning, it may be due to full containers, clogged filters or brush blockages. Use the steps below to restore proper cleaning performance.
1. Empty the Dustbin
-
Open the dustbin compartment and check if it is full.
-
If full, empty the bin and wipe the inside clean.
2. Check and Clean the Filter Screen
-
If the filter screen is covered with fine dust, cleaning performance can drop.
-
Remove the filter and gently tap it over a bin to loosen debris.
-
If needed, rinse the filter with clean water and allow it to dry fully before reinstalling.
3. Inspect the Roller Brush
-
Remove the roller brush and check for entangled hair or fibres.
-
Clean it thoroughly before placing it back into the machine.
4. Clear the Dust Collection Port
-
Check the dust collection port inside the dustbin for blockages.
-
Use a soft brush or cloth to clear any buildup that may be affecting suction.
If cleaning results do not improve after completing these steps, please contact the Floorbotics support team for further assistance.