The cleaning chamber and air duct inside the VRS 55 Enduro must be kept free of dust and debris to ensure proper suction and airflow. This guide shows how to maintain both areas using the provided tools.
1. Remove the Brushes
-
Power off the robot.
-
Press the Maintenance button to lower the cleaning unit.
-
Carefully remove both the sweeper brush and the scrubbing brush.
2. Clean the Brush Chamber
-
Use the blue cleaning brush provided with the robot.
-
Gently sweep out the inside of the brush chamber, removing dust, hair, and any trapped debris.
-
Focus on the corners and around the brush mounts.
3. Clean the Air Duct
-
Locate the air duct near the water tank area.
-
Use the same blue brush to clean inside the duct opening.
-
Make sure no loose particles remain that could block airflow.
Notes
-
Under normal use, clean the brush chamber and duct once a week.
-
If used in dusty or high-debris environments, perform this cleaning every three days.
If suction problems continue after cleaning or you hear unusual airflow noise, please contact the Floorbotics support team for assistance.