The VRS 55 Enduro can be refilled with clean water using either the supplied filler pipe or the included funnel. This guide shows how to safely connect each tool and fill the water tank correctly.
1. Use the Supplied Filler Pipe (Recommended)
-
Take the provided filler pipe and connect one end to the robot’s water inlet port.
-
You should hear a “click” sound when the pipe is securely attached.
2. Connect the Other End to a Compatible Tap
-
Attach the other end of the pipe to a tap that matches the pipe fitting.
-
Slowly open the tap and let the clean water flow into the robot.
-
Monitor the water level on the robot’s display during filling.
3. Alternative Method: Use the Funnel
-
If your tap does not match the pipe, use the supplied funnel.
-
Open the clean water inlet cap on top of the robot.
-
Pour tap water directly into the opening using the funnel.
Monitor the screen and stop filling once the level reaches 100% to avoid overflow.
4. Final Steps
-
Once filled, close the water inlet cap securely.
-
Wipe away any spilled water and store the filler pipe or funnel safely.
If you experience difficulty filling the tank or the water level does not appear on screen, please contact the Floorbotics support team for assistance.