Draining the clean water tank on your VRS 55 Enduro helps prevent stagnant water, odour or internal issues, especially if the robot will not be used for a while. This guide explains how to drain the tank using the included tools.
1. Remove the Side Cover
-
Use the screwdriver provided with the robot.
-
Unscrew and remove the two screws on the side cover.
-
Carefully lift off the cover to reveal the water valve.
2. Open the Water Valve
-
Locate the clean water valve.
-
Turn the valve slowly to begin draining the water.
-
Place a container or guide the flow to a drain.
3. Close the Valve and Reinstall the Cover
-
Once the tank is empty, close the valve firmly.
-
Reposition the cover and tighten the two screws to secure it.
Notes
-
Do not use the robot while the clean water tank is open or partially disassembled.
-
If water continues to leak after closing the valve, please contact the Floorbotics support team for assistance.