If your VRS 55 Enduro is unable to continue scanning, it may be paused due to a setting such as Do Not Disturb mode or may require a manual restart of the scanning function. Follow the steps below to resume mapping.
1. Check Do Not Disturb Mode
-
Make sure the robot is not in Do Not Disturb mode.
-
When this mode is active, the robot will not scan or begin tasks.
-
Disable this mode from the touchscreen or in the app settings.
2. Restart the Scanning Process
Use one of the following methods to manually resume scanning:
-
Press the Recharge button on the robot.
-
Press the Vacuuming and Mopping button on the dock.
-
Use the app and tap the Recharge icon or restart the task from there.
If the robot still does not resume scanning, please contact the Floorbotics support team for assistance.