To maintain optimal cleaning performance and hygiene, it’s important to regularly empty and clean the sewage (waste) water tank on your VRS 55 Enduro. This guide provides step-by-step instructions for safe and effective cleaning.
VRS 55 Enduro: How to Clean the Water Tank
1. When to Clean the Sewage Water Tank
-
After every full cleaning cycle, or
-
When the app or machine indicates “Sewage Tank Full”
2. Open the Sewage Tank Compartment
-
Power off the machine or place it in standby mode.
-
Locate the sewage tank compartment on the back side of the robot body.
-
Lift the cover and gently pull out the sewage tank handle.
3. Empty the Dirty Water
-
Hold the tank over a suitable drainage point.
-
Open the drain cap and allow all wastewater to pour out.
-
You may gently shake the tank to help clear out any residue.
4. Rinse the Inside Thoroughly
-
Fill the tank with clean tap water through the opening.
-
Close the cap and shake it gently.
-
Open the cap again and pour out the rinse water.
-
Repeat until the water drains out clear.
5. Dry and Reinstall
-
Wipe the exterior of the tank with a dry cloth.
-
Let the inside air dry if possible.
-
Reinsert the tank firmly back into its slot, ensuring it clicks into place.
6. Final Check
-
Confirm there are no leaks around the tank.
-
Close the compartment cover fully before restarting the machine.
If the sewage tank cannot be removed or the sensor still indicates "full," please contact the Floorbotics support team for assistance.