To ensure stable charging and efficient dust collection, it is important to clean the charging dock and tray area of your VR 35 on a regular basis. This article explains how to perform simple dock maintenance safely.
1. Power Off and Unplug Before Cleaning
-
Switch off the power to the dock and unplug the power cord from the wall.
-
Wait a few seconds to ensure the dock is fully powered down.
2. Remove the Cleaning Tray
-
Carefully slide out the cleaning tray from the base of the dock.
-
Take care not to spill any residual water or debris during removal.
3. Rinse and Scrub the Tray
-
Rinse the tray using clean tap water.
-
Use the cleaning brush provided to scrub away dust, dirt or residue buildup.
-
Dry the tray fully with a soft towel or air dry in a shaded area.
4. Clean the Tray Area Inside the Dock
-
Use the same cleaning brush or a soft cloth to wipe inside the tray compartment.
-
Remove any dust, debris or signs of mould.
-
Avoid splashing water into the dock's electronic components.
5. Reinsert the Tray Properly
-
Once the tray is clean and dry, reinsert it carefully, making sure both sides are properly aligned.
-
Press down gently until the tray clicks into place.
Maintenance Tips
-
Clean the tray and tray area at least once every two weeks, or more often after heavy use.
-
After each mopping session, also check for any residue or dampness in the tray.
-
Do not use harsh chemicals or submerge the entire dock in water.