How to Connect the VR 35 Max to the Mobile App

1. Connect to the App

Scan the QR code below to download and install the app.

2. Configure the app:

Press and hold the power and home buttons at the same time for 5 seconds, and you will hear the prompt "Reset Wi-Fi, enter the network configuration".

Both power and home buttons will flash in yellow colour, indicating that the Wi-Fi reset has been successful and you can reconnect.

Add the device to the app interface, and enter the Wi-Fi password to connect:

Android mobile phone connecting to Wi-Fi: follow the prompts on the mobile screen.

iOS mobile phone connecting to Wi-Fi:

Enter the Wi-Fi settings interface of the mobile phone and select the corresponding product hotspot. After the connection is successful, return to the App interface, and click the "Next" button to complete the connection according to the prompts on the screen.

Step 1 - Add Device

Step 2 - Select Robot Vacuum

Step 3 - Connect to Wi-Fi

Select your home/office Wi-Fi in the list to connect, then press Next

Step 4 - Reset the robot device

Step 5 - Select AP Mode

Select the AP mode

Step 6 - Connect your mobile phone to the robot device's hotspot

Add the device once connected to the hotspot

Step 7 - Select your WLAN

Step 8 - Your WLAN is selected

Step 9 - Connecting Device

Power on the machine and wait for the connection

Step 10 - Your device is added successfully (you may wish to rename the machine)

Step 11 - Your device is ready to go

Power on the machine and wait for the connection