The recovery tank in the Quad 800 collects all the dirty water and debris picked up during cleaning. Inside that tank are two key components that require regular care: the wire filter and the waste container. Keeping both of these clean ensures the machine maintains strong suction and avoids internal blockages.
Why This Maintenance Matters
If the waste container becomes clogged or the wire filter is damaged, dirty water may not flow properly into the tank. This can result in poor suction performance or even trigger system alerts. Regular cleaning also helps prevent bad smells from developing in the tank.
How to Clean the Waste Container
The waste container sits inside the recovery tank and collects large debris such as hair, fibres and solids. After each use, you should:
-
Remove the container from the recovery tank
-
Empty out any collected waste
-
Rinse the container thoroughly with clean water
-
Allow it to dry before placing it back in
This simple task only takes a minute and helps avoid overflows or odours.
How to Maintain the Wire Filter
The wire filter traps smaller particles before they enter the suction system. It should be checked and cleaned daily or after each use if the machine has cleaned a heavily soiled area.
To clean it:
-
Remove the wire filter from the recovery tank
-
Rinse it under clean running water
-
Use a soft brush if needed, but avoid damaging the mesh
-
Reinstall it securely after cleaning
If the filter appears bent, torn or clogged beyond cleaning, notify support to arrange a replacement.
How Often to Do This
-
Daily in most environments
-
Twice daily in dusty or high-traffic areas
-
Always check after cleaning areas with visible debris